Skip to main content

Timeline for Wifi Thermostat C Wire Help

Current License: CC BY-SA 3.0

9 events
when toggle format what by license comment
Aug 7, 2016 at 1:33 answer added user3330299 timeline score: 1
Aug 6, 2016 at 20:26 history edited user3330299 CC BY-SA 3.0
added 185 characters in body
Aug 6, 2016 at 19:57 comment added user3330299 I have a close up of the 24V transformer. It is now in the bottom left of the 2nd picture of the original post. There are NO spare terminals for the vlue wire on the 24V transformer. That light blue/blue/light blue (gray) are all daisey chained into one terminal on the 24V transformer. NOTICE that with the zoom you can see the green dotted (blue) wire goes into a screw and that one of the 24V (light) blue wires goes into a nut next to it for grounds.
Aug 6, 2016 at 19:55 history edited user3330299 CC BY-SA 3.0
zooms
Aug 6, 2016 at 19:37 comment added ThreePhaseEel Are there any spare terminals for the blue wire on the 24V transformer? (i.e. the gray device) Better yet, can you get me a closeup shot of it?
Aug 6, 2016 at 18:38 history edited user3330299 CC BY-SA 3.0
added 3 characters in body
Aug 6, 2016 at 18:37 comment added user3330299 The blue wire (that I labeled in orange "this one?" goes into that gray device that is (in the picture) above the most left wire nut. There is a lighter blue that goes into it (top left) and then right next to it is a darker blue (THIS GOES TO THE 9 PIN BLUE). Then next to that is a light blue (gray) that goes up and out the side of the equipment wall into another piece of equipment. I can't add another picture, so what I did was edit the original post. WHAT I DID WAS follow the 9 pin blue with ORANGE dots/line showing where it goes. Along with those other cables going into that 24V thing
Aug 6, 2016 at 17:42 comment added ThreePhaseEel Can you figure out where the blue wire from the 9-pin connector on the control board leads?
Aug 6, 2016 at 16:24 history asked user3330299 CC BY-SA 3.0