Skip to main content
Home Improvement

Return to Question

Added a sketch to hopefully clarify my intent; added 15 characters in body
Source Link
Beerdidman
Beerdidman
  • 21
  • 1
  • 1
  • 4

I'menter image description here I'm remodeling my kitchen. First major remodel. I have purchased 12" deep unfinished stock cabinets. I would like to make the face of the 30x30x12 wall cabinet that will be above the stove/oven be 15" from the wall so I can add crown molding to all the wall cabinet topscabinets later on in phase 2 of the remodel. Is this possible by attaching a couple 2x4's flat against the wall to the existing studs and attaching the cabinet to those?

I'm remodeling my kitchen. First major remodel. I have purchased 12" deep unfinished stock cabinets I would like to make the 30x30x12 wall cabinet that will be above the stove/oven be 15" from the wall so I can add crown molding to all the wall cabinet tops later on in phase 2 of the remodel. Is this possible by attaching 2x4's to the existing studs and attaching the cabinet to those?

enter image description here I'm remodeling my kitchen. First major remodel. I have purchased 12" deep unfinished stock cabinets. I would like to make the face of the 30x30x12 wall cabinet that will be above the stove/oven be 15" from the wall so I can add crown molding to all the wall cabinets later on. Is this possible by attaching a couple 2x4's flat against the wall to the existing studs and attaching the cabinet to those?

edited title
Link
Beerdidman
Beerdidman
  • 21
  • 1
  • 1
  • 4

How to make a 12" deep wall cabinet face be 15" from existing wall

Source Link
Beerdidman
Beerdidman
  • 21
  • 1
  • 1
  • 4

How to make a 12" deep wall cabinet 15" from wall

I'm remodeling my kitchen. First major remodel. I have purchased 12" deep unfinished stock cabinets I would like to make the 30x30x12 wall cabinet that will be above the stove/oven be 15" from the wall so I can add crown molding to all the wall cabinet tops later on in phase 2 of the remodel. Is this possible by attaching 2x4's to the existing studs and attaching the cabinet to those?