Skip to main content
Home Improvement

Return to Question

Post Deleted by CommunityBot
Post Locked by CommunityBot
Post Migrated Away to raspberrypi.stackexchange.com by BMitch
Post Closed as "Not suitable for this site" by BMitch
Source Link
Tngld
Tngld
  • 1
  • 1

Fibaro Wall Plug FGWPE_F-101 Node has failed

I have a Fibaro Wall Plug FGWPE_F-101 that I try to connect to my newly established HA system. I use The Domoticz software on a Raspberry Pi w/Razberry HW to manage this. The system discovers the plug, and I can add the switch to turn on/off light. But here the problem starts. Now the plug gets unreachable by Domoticz. I get the Error: OpenZWave: Node has failed (or is not alive), Switch command not sent! The plug is glowing white, and by the looks of it, it is alive. So what can this be?

I have three plugs, and all seem to have this problem.

I brought the system (RPi and Fibaro plugs) to work today, just to test some more there. But at work I don't get this problem. How can this be? It works great on the powergrid and network at work, but not at home...