4 replaced http://d2amilv9vi9flo.cloudfront.net/ with https://d2amilv9vi9flo.cloudfront.net/
source | link

One really strong option to consider is drawboring.

cross-section of a drawbore peg http://d2amilv9vi9flo.cloudfront.net/wp-content/uploads/2010/10/drawborefinishedjoint.jpgcross-section of a drawbore peg

These use a slightly offset hole to pull the joint tight. The trunnel (peg) should ideally be dry, straight-grained wood, but usually a home-center oak dowel will suffice. I found them to be reasonably easy as a beginner, and they even compensate for a loose joint if you don't quite get the fit exactly right.

Google "drawbore joint" for all the details you could ever want.

One really strong option to consider is drawboring.

cross-section of a drawbore peg http://d2amilv9vi9flo.cloudfront.net/wp-content/uploads/2010/10/drawborefinishedjoint.jpg

These use a slightly offset hole to pull the joint tight. The trunnel (peg) should ideally be dry, straight-grained wood, but usually a home-center oak dowel will suffice. I found them to be reasonably easy as a beginner, and they even compensate for a loose joint if you don't quite get the fit exactly right.

Google "drawbore joint" for all the details you could ever want.

One really strong option to consider is drawboring.

cross-section of a drawbore peg

These use a slightly offset hole to pull the joint tight. The trunnel (peg) should ideally be dry, straight-grained wood, but usually a home-center oak dowel will suffice. I found them to be reasonably easy as a beginner, and they even compensate for a loose joint if you don't quite get the fit exactly right.

Google "drawbore joint" for all the details you could ever want.

3 added 55 characters in body
source | link

One really strong option to consider is drawbore pegsdrawboring.

cross-section of a drawbore peg http://d2amilv9vi9flo.cloudfront.net/wp-content/uploads/2010/10/drawborefinishedjoint.jpg

These use a slightly offset hole to pull the joint tight. They canThe trunnel (peg) should ideally be done fairly easily withdry, straight-grained wood, but usually a home-center oak dowelsdowel will suffice. I found them to be reasonably easy as a beginner, and they even compensate for a loose joint if you don't quite get the fit exactly right.

Google "drawbore joint" for all the details you could ever want.

One really strong option to consider is drawbore pegs.

cross-section of a drawbore peg http://d2amilv9vi9flo.cloudfront.net/wp-content/uploads/2010/10/drawborefinishedjoint.jpg

These use a slightly offset hole to pull the joint tight. They can be done fairly easily with home-center oak dowels. I found them to be reasonably easy as a beginner, and they even compensate for a loose joint if you don't quite get the fit exactly right.

Google "drawbore joint" for all the details you could ever want.

One really strong option to consider is drawboring.

cross-section of a drawbore peg http://d2amilv9vi9flo.cloudfront.net/wp-content/uploads/2010/10/drawborefinishedjoint.jpg

These use a slightly offset hole to pull the joint tight. The trunnel (peg) should ideally be dry, straight-grained wood, but usually a home-center oak dowel will suffice. I found them to be reasonably easy as a beginner, and they even compensate for a loose joint if you don't quite get the fit exactly right.

Google "drawbore joint" for all the details you could ever want.

2 added 8 characters in body
source | link

One really strong option to consider is drawbore pegs.

cross-section of a drawbore peg http://d2amilv9vi9flo.cloudfront.net/wp-content/uploads/2010/10/drawborefinishedjoint.jpg

These use a slightly offset hole to pull the joint tight. They can be done fairly easily with home-center oak dowels. I found them to be reasonably easy as a beginner, and they even compensate for a loose joint if you don't quite get the fit exactly right.

Google "drawbore joint" for all the details you could ever want.

One really strong option to consider is drawbore pegs.

cross-section of a drawbore peg http://d2amilv9vi9flo.cloudfront.net/wp-content/uploads/2010/10/drawborefinishedjoint.jpg

These use a slightly offset hole to pull the joint tight. They can be done fairly easily with home-center oak dowels. I found them to be reasonably easy as a beginner, and they even compensate for a loose joint if you don't quite get the fit right.

Google "drawbore joint" for all the details you could ever want.

One really strong option to consider is drawbore pegs.

cross-section of a drawbore peg http://d2amilv9vi9flo.cloudfront.net/wp-content/uploads/2010/10/drawborefinishedjoint.jpg

These use a slightly offset hole to pull the joint tight. They can be done fairly easily with home-center oak dowels. I found them to be reasonably easy as a beginner, and they even compensate for a loose joint if you don't quite get the fit exactly right.

Google "drawbore joint" for all the details you could ever want.

1
source | link