Timeline for How can I ensure precise alignment of wooden parts assembled with bolts?
Current License: CC BY-SA 3.0
19 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Oct 25, 2013 at 17:34 | history | wiki removed | ChrisF♦ | ||
| Oct 25, 2013 at 17:00 | history | edited | mike | CC BY-SA 3.0 |
added 46 characters in body
|
| Oct 25, 2013 at 5:07 | history | edited | Michael Karas♦ | CC BY-SA 3.0 |
edited body
|
| Oct 25, 2013 at 2:22 | history | edited | mike | CC BY-SA 3.0 |
added 558 characters in body
|
| Oct 25, 2013 at 0:07 | history | edited | mike | CC BY-SA 3.0 |
added 82 characters in body
|
| Oct 25, 2013 at 0:06 | comment | added | mike | @AnnonomusPerson - Good point on the PVC for large bolts. Tubing cutters make quick work, or the heavier pipe cutters. | |
| Oct 24, 2013 at 23:42 | comment | added | Anonymous Penguin | Joinery might also help on some joints to make it easier to assemble in some spots too. Also, PVC seems easier to cut than metal, and has a cleaner cut. That part will be covered through (maybe some washers?). I know it wouldn't look pretty or anything but it is more for function than look. | |
| Oct 24, 2013 at 23:17 | history | edited | mike | CC BY-SA 3.0 |
added 393 characters in body
|
| Oct 24, 2013 at 23:11 | history | edited | mike | CC BY-SA 3.0 |
added 393 characters in body
|
| Oct 24, 2013 at 21:53 | comment | added | mike | @AnnonomusPerson - for precise alignment, I'd choose a drill bit that would create a snug hole for the tubing. You might also want to take a look at the new methods that I added. | |
| Oct 24, 2013 at 21:49 | history | edited | mike | CC BY-SA 3.0 |
added 2 characters in body
|
| Oct 24, 2013 at 21:43 | history | edited | mike | CC BY-SA 3.0 |
added 79 characters in body
|
| Oct 24, 2013 at 21:37 | history | edited | mike | CC BY-SA 3.0 |
added 136 characters in body
|
| Oct 24, 2013 at 21:33 | comment | added | Anonymous Penguin | Thanks! Number two looks like it will work for me. I think that I will try to glue/fasten the tube on one end so it doesn't slide or fall out when not completely assembled. | |
| Oct 24, 2013 at 21:32 | vote | accept | Anonymous Penguin | ||
| Oct 24, 2013 at 21:27 | history | edited | mike | CC BY-SA 3.0 |
added 145 characters in body
|
| Oct 24, 2013 at 21:20 | history | edited | mike | CC BY-SA 3.0 |
added 145 characters in body
|
| Oct 24, 2013 at 21:14 | history | edited | mike | CC BY-SA 3.0 |
added 145 characters in body
|
| Oct 24, 2013 at 21:05 | history | answered | mike | CC BY-SA 3.0 |