Skip to main content
Home Improvement

Return to Answer

sweep tee, not a wye
Source Link
Mazura
Mazura
  • 13.5k
  • 1
  • 19
  • 58

I would replace that hare-brained baffle T fitting with a 90° wyesweep tee fitting like this: enter image description here

I could not find the right flavor online, but I have also seen 1.5 inch white plastic with hand tightening connectors.

Even a 45° wye would be better:
enter image description here

I would replace that hare-brained baffle T fitting with a 90° wye fitting like this: enter image description here

I could not find the right flavor online, but I have also seen 1.5 inch white plastic with hand tightening connectors.

Even a 45° wye would be better:
enter image description here

I would replace that hare-brained baffle T fitting with a 90° sweep tee fitting like this: enter image description here

I could not find the right flavor online, but I have also seen 1.5 inch white plastic with hand tightening connectors.

Even a 45° wye would be better:
enter image description here

add fitting names
Source Link
edit approved Feb 1, 2016 at 13:14
rogerdpack
edit approved Feb 1, 2016 at 13:14
rogerdpack
  • 978
  • 3
  • 18
  • 37

I would replace that hare-brained baffle T fitting with a 90° partwye fitting like this: enter image description here

I could not find the right flavor online, but I have also seen 1.5 inch white plastic with hand tightening connectors. Even

Even a 45° Ywye would be better:
enter image description here

I would replace that hare-brained baffle T fitting with a part like this: enter image description here

I could not find the right flavor online, but I have seen 1.5 inch white plastic with hand tightening connectors. Even a 45° Y would be better:
enter image description here

I would replace that hare-brained baffle T fitting with a 90° wye fitting like this: enter image description here

I could not find the right flavor online, but I have also seen 1.5 inch white plastic with hand tightening connectors.

Even a 45° wye would be better:
enter image description here

Source Link
wallyk
wallyk
  • 12.4k
  • 3
  • 24
  • 50

I would replace that hare-brained baffle T fitting with a part like this: enter image description here

I could not find the right flavor online, but I have seen 1.5 inch white plastic with hand tightening connectors. Even a 45° Y would be better:
enter image description here