Timeline for Forcing drain pipe into p trap in an angle
Current License: CC BY-SA 4.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 6 at 21:24 | comment | added | Richard | Yeah it doesnt seem to budge after i remove the ring fully :( | |
| Nov 6 at 21:23 | comment | added | spuck | If you loosen the ring completely, can you separate the two pieces? It may be just very snug, as the whole purpose of the threaded flange and ring is to avoid the need for gluing it. If they did glue it, there will be no option besides cutting the pipe at some location. | |
| Nov 6 at 21:20 | comment | added | Richard | Thanks for your reply, but it seems like its somehow glued together. I cant seem to adjust the angle even after i loosened the part | |
| Nov 6 at 21:09 | history | answered | spuck | CC BY-SA 4.0 |