Timeline for Does the wiring for my new heat pump meet code standards?
Current License: CC BY-SA 4.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Oct 29 at 16:58 | comment | added | Milwrdfan | Considering the size of the conductors, the large wire nuts used, and that I'm not seeing any other (low voltage) control lines going to this minisplit, my money is on these are line voltage connections. | |
| Oct 29 at 13:54 | comment | added | Huesmann | Depends if it's low voltage. | |
| Oct 28 at 14:58 | comment | added | Milwrdfan | From my novice (non-electrician training), I'd say at a minimum that external splice is a non-starter, as anything outdoors would be considered "wet location", and that certainly doesn't look suitable for a junction in a wet location. Also, I'm not aware of a scenario where splices can be made inside a conduit type of wiring path like they did, and especially outside of a junction box. | |
| Oct 28 at 14:52 | history | answered | Milwrdfan | CC BY-SA 4.0 |