Skip to main content
10 events
when toggle format what by license comment
Jun 15, 2016 at 4:47 history bumped CommunityBot This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
May 16, 2016 at 3:57 history bumped CommunityBot This question has answers that may be good or bad; the system has marked it active so that they can be reviewed.
Apr 16, 2016 at 0:25 answer added Mazura timeline score: 1
Mar 16, 2016 at 13:47 answer added Davorin Ruševljan timeline score: 0
Jul 17, 2013 at 18:59 comment added Jacob S Having air movement helps to force the condensate out. Fun experiment -- fill two cups with ice water and allow to form condensate. Hold one and blow compressed air over it -- then check which of the two cups has more water stuck to the outside. :-) In essence, the air movement helps smaller drops overcome friction -- but all in all, it is a personal preference. Lowering the pressure just decreases the amount of blowing around the water does in the tin.
Jul 17, 2013 at 18:28 comment added l3win Two plugs actually, one for each tank. Thanks for the info. Why don't you drop the internal pressure all the way to zero?
Jul 16, 2013 at 17:26 history edited Tester101 CC BY-SA 3.0
edited title
Jul 16, 2013 at 16:56 review First posts
Jul 17, 2013 at 4:14
Jul 16, 2013 at 16:54 comment added Jacob S Single plug underneath? If so, I drain my single-tank into a disposable aluminum pie tin (i reuse it, just keep a shop rag on it) after unplugging power, dropping the pressure down to about 20-30 psi internal using my blowgun attachment and letting it sit for a bit, then pour the condensate into an old compressor oil bottle to be dropped off for disposal. If necessary, you can probably fit a temporary plastic hose to act as a drain line if the plug is higher/in an awkward position. Just my 2 cents.
Jul 16, 2013 at 16:40 history asked l3win CC BY-SA 3.0