Timeline for How to remove a press fit fitting
Current License: CC BY-SA 4.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jun 25, 2023 at 19:12 | comment | added | Adirondack Jim | As I said, my gut tells me the part of this answer that states they are permanent (and must be cut out) is the correct one, so I upvoted it. I will ask a plumber the next time I hire one. | |
| Jun 23, 2023 at 18:21 | history | edited | DIY75 | CC BY-SA 4.0 |
deleted 67 characters in body
|
| Jun 23, 2023 at 13:53 | comment | added | FreeMan | This is a link-only answer. Once that site goes down, it's utterly useless... | |
| Jun 23, 2023 at 13:12 | comment | added | Adirondack Jim | This is to Ruskes and your answer. I'm a bit confused. You say they are permanent (and so far I think you're correct), but you say to use a trained professional to remove it. You hint there may be a tool. If so, please state what it is. (I'm particularly interested about a jay613's answer: I think he implies the crimp tool distorts the pipe so it still has to have that part cut off). | |
| Jun 23, 2023 at 13:08 | comment | added | Adirondack Jim | I may have seen the same article. I couldn't for the life of me find that tool. | |
| Jun 23, 2023 at 11:36 | comment | added | jay613 | I propose the linked article is pure click bait. It says you first saw out the fitting on both sides and then "carefully" use a (non existent) removal tool to remove it. After you've chopped it out :( The general meandering and pointlessness of most sentences says click bait to me. | |
| Jun 22, 2023 at 22:17 | history | edited | DIY75 | CC BY-SA 4.0 |
added 67 characters in body
|
| Jun 22, 2023 at 21:47 | history | edited | DIY75 | CC BY-SA 4.0 |
added 80 characters in body
|
| Jun 22, 2023 at 21:13 | history | answered | DIY75 | CC BY-SA 4.0 |