Timeline for Wood glue + sawdust filler not drying
Current License: CC BY-SA 4.0
11 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jan 12, 2023 at 14:53 | comment | added | Huesmann | Use a small fan to blow air on the hole. It'll help the glue dry faster (assuming it's a drying type, not a curing type). | |
| Jan 11, 2023 at 20:11 | comment | added | leftaroundabout | Or use epoxy. That doesn't rely on air surfaces at all. | |
| Jan 11, 2023 at 18:23 | comment | added | JimmyJames | @crip659 Specifically, it's the depth/thickness of glue that matters. I've had really thick globs that didn't dry completely for months. I would guess the skin that forms on the surface prevents the center from drying out. | |
| Jan 11, 2023 at 18:00 | history | tweeted | twitter.com/StackDIY/status/1613234297996992513 | ||
| Jan 11, 2023 at 17:25 | comment | added | R.. GitHub STOP HELPING ICE | Instant-drying low-viscosity CA glue in place of wood glue works wonders for this. Repeatedly add a little sawdust, apply a single drop of CA glue. | |
| Jan 11, 2023 at 3:52 | history | became hot network question | |||
| Jan 11, 2023 at 2:55 | vote | accept | Eaten by a Grue | ||
| Jan 10, 2023 at 22:41 | answer | added | JACK | timeline score: 25 | |
| Jan 10, 2023 at 20:22 | comment | added | Eaten by a Grue | @crip659 - that makes sense. Do you think if I had fancier shelves the glue would dry faster? | |
| Jan 10, 2023 at 19:56 | comment | added | crip659 | Usually the larger the amount the longer the drying time. A small puddle of paint will take longer to dry hard(unless it is on an expensive piece) than paint brushed onto a wall. | |
| Jan 10, 2023 at 19:51 | history | asked | Eaten by a Grue | CC BY-SA 4.0 |