Skip to main content
16 events
when toggle format what by license comment
Jul 6, 2013 at 14:21 comment added Andrew Yeah, this handyman (recommended by realtor) turned the water back on before finishing sweating the pipes. It soaked the area pretty good for about 20 seconds. Fortunately it drained down the chase to the basement furnace room, so no damage, but I was not pleased. Good suggestion nonetheless!
Jul 1, 2013 at 1:54 comment added bcworkz Misplaced O-ring? I guess I underestimated the ineptitude of some "plumbers". Glad it was an easy fix and you ignored my suggestion :)
Jun 30, 2013 at 21:21 vote accept Andrew
Jun 30, 2013 at 21:19 comment added Andrew I finally got around to this. When I removed the cartridge one of the rubber o-ring seals popped off, so I'm fairly certain the o-ring was causing the friction, not being set properly. I did add some teflon grease to the contact points and now it's amazing how smooth it turns on. The grease was probably not necessary and I hope it won't degrade the o-rings over time.
Jun 21, 2013 at 13:51 vote accept Andrew
Jun 30, 2013 at 21:21
S Jun 20, 2013 at 21:13 history bounty ended CommunityBot
S Jun 20, 2013 at 21:13 history notice removed CommunityBot
Jun 17, 2013 at 19:51 answer added DMoore timeline score: 1
Jun 13, 2013 at 1:36 answer added Johnny z timeline score: 1
Jun 12, 2013 at 23:57 comment added bcworkz I'd get a new one. One can sometimes fix leaks, but not rough operation. It was more likely defective from the start than someone damaging it in such a way it affected smooth operation.
S Jun 12, 2013 at 19:47 history bounty started Andrew
S Jun 12, 2013 at 19:47 history notice added Andrew Authoritative reference needed
Jun 12, 2013 at 19:44 history edited Andrew CC BY-SA 3.0
clarification
Mar 24, 2013 at 19:48 history tweeted twitter.com/#!/StackDIY/status/315913119849381888
Mar 18, 2013 at 12:38 history edited Tester101 CC BY-SA 3.0
added 46 characters in body; edited title
Mar 17, 2013 at 23:40 history asked Andrew CC BY-SA 3.0