Skip to main content
9 events
when toggle format what by license comment
Jun 7, 2022 at 19:17 comment added NathanLite @FreeMan, the non disposal side seems to go down okay on its own, but when the disposal side backs up with water and then turn it on to get it to go down that's when it backs up in the other non-disposal side.
Jun 6, 2022 at 15:44 comment added HABO Aside: The metal nuts can be slipped off the tail pieces and replaced with new beveled washers and plastic nuts. The existing plastic nuts are captive, but the washers can be replaced. Cleaning everything up and applying a little silicone grease to the various fittings can do wonders for minor leaks and ease of maintenance.
Jun 6, 2022 at 14:25 comment added FreeMan Does the other sink bowl back up or just the one with the disposal? If it's just the disposal side, then that's the only side you need to worry about. Somebody has done you a favor by installing the clean out on the left side, but they lost points by using standard, mostly glued fittings to make the traps instead of standard trap kits. If you end up taking things apart, you might consider replacing each individual home-made trap with a standard screw & swivel trap kit.
Jun 6, 2022 at 14:19 history edited gnicko CC BY-SA 4.0
added picture directly
Jun 6, 2022 at 5:01 comment added Ed Beal I have never seen a 3 port wye or whatever is that code? At least there is a clean out I would try that first.
Jun 5, 2022 at 19:54 answer added DIY75 timeline score: 1
Jun 5, 2022 at 19:38 comment added DIY75 Lesson learned, do not put anything in the disposal that will not disintegrate, like the skins of veggies *Avocados are worse)
Jun 5, 2022 at 18:48 comment added crip659 The third inlet is a clean out, so you do not need to remove the other connected pipes to clear a blockage, past that point, which is where the blockage might be.
Jun 5, 2022 at 18:34 history asked NathanLite CC BY-SA 4.0