Timeline for How do I plumb a door that has spring-hinges?
Current License: CC BY-SA 4.0
21 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Feb 19 at 15:02 | history | protected | FreeMan | ||
Feb 19 at 14:25 | answer | added | JacksonTJarrard | timeline score: -1 | |
Apr 25, 2022 at 15:46 | history | edited | FreeMan | CC BY-SA 4.0 |
deleted 3 characters in body
|
Apr 24, 2022 at 20:35 | vote | accept | Jack | ||
Apr 24, 2022 at 18:17 | answer | added | Chris | timeline score: 1 | |
Apr 24, 2022 at 17:24 | comment | added | Jack | @Chris your suggestion of swapping top & middle worked perfectly. If you make it an answer, I'll accept it. | |
Apr 24, 2022 at 16:23 | history | edited | Jack | CC BY-SA 4.0 |
added photos of behind hinge and hinge gap; added gap dimensions
|
Apr 24, 2022 at 15:12 | comment | added | Jack | If the problem has not been resolved yet, a picture of the whole hinge side would help. The gap on that side MUST be even, ideally no more than 1/8", more importantly uniform from top to bottom. If more than one shot is needed, so be it. | |
S Apr 21, 2022 at 11:40 | history | edited | ThreePhaseEel | CC BY-SA 4.0 |
put image on new line so that sentence isn't cut off (might've just been an issue with big monitors); spellcheck; extra word to fit 6+ character change limit
|
S Apr 21, 2022 at 11:40 | history | suggested | CommunityBot | CC BY-SA 4.0 |
put image on new line so that sentence isn't cut off (might've just been an issue with big monitors); spellcheck; extra word to fit 6+ character change limit
|
Apr 21, 2022 at 10:45 | comment | added | Russell McMahon | A shim under either the doorside or wallside plate of the bottom hinge may help. | |
Apr 21, 2022 at 7:00 | review | Suggested edits | |||
S Apr 21, 2022 at 11:40 | |||||
Apr 20, 2022 at 16:04 | comment | added | Chris | I would as a test remove top high and move the middle hinge to the top so you only have 2 hinges and see if it still rubs and if the door still auto-close. You may be able to simply switch out the top hinge, or just swap the top/middle | |
Apr 20, 2022 at 9:00 | history | tweeted | twitter.com/StackDIY/status/1516703224341970946 | ||
Apr 20, 2022 at 4:37 | history | became hot network question | |||
Apr 19, 2022 at 21:34 | comment | added | HoneyDo | Tip #3 in your question will work on spring-loaded hinges as well. This assumes the hinge has been sprung by an object being caught in the door near the hinge, thus bending the hinge plate out of shape. You first need to release the tension of the spring on the hinge and remove the retaining pin. I've then used a vise to squeeze the plates back together. | |
Apr 19, 2022 at 21:27 | answer | added | isherwood | timeline score: 11 | |
Apr 19, 2022 at 20:48 | comment | added | crip659 | Check the plumb and square of the door frame, if that is out, adjusting hinges won't help as much. | |
Apr 19, 2022 at 20:47 | answer | added | JACK | timeline score: 6 | |
S Apr 19, 2022 at 20:26 | review | First questions | |||
Apr 19, 2022 at 20:38 | |||||
S Apr 19, 2022 at 20:26 | history | asked | Jack | CC BY-SA 4.0 |