Skip to main content
Home Improvement

Return to Answer

deleted 2 characters in body
Source Link
manassehkatz-Moving 2 Codidact
manassehkatz-Moving 2 Codidact
  • 130.9k
  • 13
  • 139
  • 363

Connect the new switch where the hot is black, lamp side is Red and the neutral goes to the white. Be sure the two black wires are under the screw or have a wire nut to connect them. It appears it is fed with two wires, then continued on to the next location with the light circuit added as the red. At that point white will be netureralneutral, black will be hot and red will be the switch leg.

Connect the new switch where the hot is black, lamp side is Red and the neutral goes to the white. Be sure the two black wires are under the screw or have a wire nut to connect them. It appears it is fed with two wires, then continued on to the next location with the light circuit added as the red. At that point white will be netureral, black will be hot and red will be the switch leg.

Connect the new switch where the hot is black, lamp side is Red and the neutral goes to the white. Be sure the two black wires are under the screw or have a wire nut to connect them. It appears it is fed with two wires, then continued on to the next location with the light circuit added as the red. At that point white will be neutral, black will be hot and red will be the switch leg.

Source Link
Gil
Gil
  • 7.1k
  • 1
  • 6
  • 21

Connect the new switch where the hot is black, lamp side is Red and the neutral goes to the white. Be sure the two black wires are under the screw or have a wire nut to connect them. It appears it is fed with two wires, then continued on to the next location with the light circuit added as the red. At that point white will be netureral, black will be hot and red will be the switch leg.