Skip to main content
7 events
when toggle format what by license comment
Oct 21, 2022 at 17:30 comment added jay613 Further hindsight: I accepted Ecnerwal's answer because after opening the floor and thinking carefully about it, I think implementation and maintenance issues would be a "level of irritation" to say the least. Also @crisp659 makes a good point above, that I haven't explored fully: Each winter flush will bring a couple gallons of very cold water that will absorb some of the radiator's heat. The bathroom might end up a little colder than otherwise because it's not its own zone. Radiant heat with its own thermostat lets me keep the bathroom a tad warmer than the house.
Oct 21, 2022 at 17:26 comment added jay613 After demo and removal of the rad I decided not to move it, but to remove it and install electric floor heat. The cost of the floor heat materials was about equal to what the labor would have been to replace the radiator in my new location behind the toilet. The labor to install the floor heat was trivial, I did most of it myself with free support including video calls from the vendor. The result is 100 times better in every respect. In retrospect, this is a silly question. Hard to imagine doing a bathroom and keeping any kind of radiator!
Oct 21, 2022 at 17:18 vote accept jay613
Oct 21, 2022 at 16:17 comment added UnhandledExcepSean Jay, there is a request from a new user (Lisa) requesting "Just curious if you did this in your Reno. I am thinking of doing the same.can you post photos?" I'm posting the comment as she cannot, her answer will certainly be deleted, and other people may be interested in a follow-up to see how this worked out.
Feb 9, 2022 at 23:25 comment added crip659 Wonder if the mass of the toilet plus water would affect heating the room.
Feb 9, 2022 at 16:08 answer added Ecnerwal timeline score: 2
Feb 9, 2022 at 15:48 history asked jay613 CC BY-SA 4.0