Timeline for I replaced the cylinder on my Honeywell HM750 but the 'replace cylinder' light is still on
Current License: CC BY-SA 4.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 3, 2022 at 16:17 | comment | added | Ed Beal | I know when I have received some rebuild kits the instructions that come with the kit do not have the reset. The op may not have had the complete manual reversed down vote as the question has information. But + jay got at least pointing the op to the location. | |
| Feb 3, 2022 at 15:49 | comment | added | jay613 | "To the letter" includes the indicator reset on page 25? | |
| Feb 3, 2022 at 15:47 | comment | added | jay613 | This is sounding like Tegnigal Suppord. "Reboot it again" :) | |
| Feb 3, 2022 at 14:12 | comment | added | Carl Witthoft | Another thing to try is to unplug & wait a minute or so in case there's some RAM that need clearing. | |
| Feb 2, 2022 at 23:21 | comment | added | Mattman944 | Read the instructions. There is often a special step to reset indicators such as this. Sometimes holding down a button for 5-10 seconds. | |
| Feb 2, 2022 at 23:14 | history | asked | grbonk | CC BY-SA 4.0 |