Timeline for Not getting 240V from circuit panel
Current License: CC BY-SA 4.0
10 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Oct 21, 2021 at 20:38 | answer | added | Harper - Reinstate Monica | timeline score: 2 | |
| Oct 21, 2021 at 18:23 | comment | added | JPhi1618 | You need to take voltage readings on the wires going to the first breaker after the meter and work your way down from there. | |
| Oct 21, 2021 at 18:08 | comment | added | LKent | The meter has a lock and seal. The outside breaker is about a foot from the meter which is on a cable that runs to the panel. | |
| Oct 21, 2021 at 18:00 | comment | added | LKent | Apologies for late reply. There is a circuit breaker outside where I can cut the circuit from the meter to the panel. | |
| Oct 21, 2021 at 16:50 | comment | added | crip659 | Might need the power company to check their wires/devices also. Might have problem between the pole and house(their stuff) | |
| Oct 21, 2021 at 16:47 | history | edited | LKent | CC BY-SA 4.0 |
added 2 characters in body
|
| Oct 21, 2021 at 16:46 | comment | added | Harper - Reinstate Monica | Where is the very first disconnect or breaker past the meter? Do you have access to the meter? | |
| Oct 21, 2021 at 16:44 | answer | added | JRaef | timeline score: -1 | |
| S Oct 21, 2021 at 16:37 | review | First questions | |||
| Oct 21, 2021 at 16:53 | |||||
| S Oct 21, 2021 at 16:37 | history | asked | LKent | CC BY-SA 4.0 |