Skip to main content
8 events
when toggle format what by license comment
Jul 17, 2021 at 0:46 comment added onlettinggo @manassehkatz-Moving2Codidact right, what I should have said is 20 amp breaker and a duplex 15 amp outlet. Language and the way people will interpret said language is hard.
Jul 16, 2021 at 22:48 history edited manassehkatz-Moving 2 Codidact CC BY-SA 4.0
added 221 characters in body
Jul 16, 2021 at 22:38 comment added Ed Beal I did understand but it was hard to read and I know the code, just mentioning it to help future answers.
Jul 16, 2021 at 21:23 history edited manassehkatz-Moving 2 Codidact CC BY-SA 4.0
added 91 characters in body
Jul 16, 2021 at 21:22 comment added manassehkatz-Moving 2 Codidact @EdBeal What I'm trying to say is that based on the original language "single 120v 20 amp breaker to supply a single 15 amp outlet" there would be a code violation. The practical situation is: Need GFCI. GFCI cheapest at the receptacle. GFCI is pretty much always duplex receptacle. Therefore unlikely to actually install a single 15A. But if OP stuck to the original plan exactly (and presumably satisfied GFCI requirement at the breaker) then there would be a problem.
Jul 16, 2021 at 21:00 comment added Ed Beal The way you have worded the 15 amp receptacle on a 20 amp circuit is hard to read. Just saying since a GFCI Is required I just use that as I haven’t seen a single GFCI receptacle, a dead face sure but really?
Jul 16, 2021 at 19:27 comment added onlettinggo Thank you for the answer. This outlet will be located inside a storage cubby and go via a 15 amp rated extension cord to a power inlet through the wall of a shed. It's way to expensive for me to run proper power to the shed so this will have to do for now. About the other users comment on my original question, I think I will switch to a 20amp outlet even though it won't make a difference I think...
Jul 16, 2021 at 19:22 history answered manassehkatz-Moving 2 Codidact CC BY-SA 4.0