Timeline for How can I connect floating 2x6 wall plates to 4x4 posts?
Current License: CC BY-SA 4.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 6, 2021 at 18:25 | comment | added | Aaron | Thanks @FreeMan. Reassuring that toenail/pocket hole should be strong enough. I'm leaving 1/16" between the boards but that's just for aesthetics and to allow a small amount of light through. This is going to be a full on naked shower in a neighborhood where houses are about 10' apart, so privacy is a must. Roof will be added to the design next ;-) | |
| May 6, 2021 at 18:19 | comment | added | FreeMan | Fair enough, @isherwood. Wasn't sure how much "privacy" was needed since there's no apparent gap in these boards - generally a bathing suit is still worn at an outdoor shower, but, you never know... | |
| May 6, 2021 at 18:18 | comment | added | isherwood | I'm not sure small gaps reduce wind force that much. You'd have to leave 25% or better open. That suddenly gets much less private. :) | |
| May 6, 2021 at 18:13 | history | answered | FreeMan | CC BY-SA 4.0 |