Skip to main content
15 events
when toggle format what by license comment
Mar 31, 2021 at 1:18 answer added ThreePhaseEel timeline score: 3
Mar 27, 2021 at 2:35 history edited rsg81800 CC BY-SA 4.0
added 24 characters in body
Mar 27, 2021 at 2:25 history edited rsg81800 CC BY-SA 4.0
added 795 characters in body
Mar 26, 2021 at 18:43 comment added J... Is that (white) tape on the feeder wires up top? If so, I would also remove it to inspect. With no bushings or grommets on the input it's likely that the person who made this mess also damaged the insulation on the sharp punch-out hole and then "fixed" it with tape. If that's the case, ideally you have enough length to cut the damaged portion away and remake the connection with good wire behind it.
Mar 26, 2021 at 18:40 history edited Machavity CC BY-SA 4.0
Improved Formatting
Mar 26, 2021 at 3:44 history became hot network question
Mar 26, 2021 at 3:12 answer added Harper - Reinstate Monica timeline score: 7
Mar 26, 2021 at 0:00 history tweeted twitter.com/StackDIY/status/1375236137279717382
Mar 25, 2021 at 22:41 comment added ThreePhaseEel @rsg81800 -- can you post a good, clear shot of the label on the inside left of the panel please? Also, is this an attached or a detached garage, and is replacing the wiring from the main panel to this subpanel an option?
Mar 25, 2021 at 21:33 comment added rsg81800 Ill take a look and report back, thanks
Mar 25, 2021 at 21:02 history edited isherwood CC BY-SA 4.0
edited title
Mar 25, 2021 at 20:41 answer added Ed Beal timeline score: 15
Mar 25, 2021 at 19:58 comment added Greg Hill Welcome! You're right: the situation pictured here is pretty bad (dangerous). But if you'd like an answer that helps you make a plan for fixing the problem, tell us more about how those three NM cables connect to the 240 and 120 volt outlets.
Mar 25, 2021 at 19:34 review First posts
Mar 26, 2021 at 1:26
Mar 25, 2021 at 19:34 history asked rsg81800 CC BY-SA 4.0