Skip to main content
12 events
when toggle format what by license comment
Feb 18, 2021 at 16:49 history edited MonkeyZeus CC BY-SA 4.0
added 152 characters in body
Feb 18, 2021 at 15:16 history edited MonkeyZeus CC BY-SA 4.0
added 76 characters in body
Feb 18, 2021 at 15:15 comment added MonkeyZeus @FreeMan Comments are second-hand citizens so if it's not in the post body then it's as good as being non-existent sometimes; especially in a 10+ comment thread.
Feb 18, 2021 at 15:02 comment added MonkeyZeus @FreeMan OP did mention that they unplugged the water heater at some point in the comments.
Feb 18, 2021 at 14:49 comment added MonkeyZeus @FreeMan Thanks! I've updated my image to an electric water heater and updated my answer slightly to reflect the anatomy.
Feb 18, 2021 at 14:48 history edited MonkeyZeus CC BY-SA 4.0
added 81 characters in body
Feb 18, 2021 at 14:42 comment added FreeMan Note that it's reasonably likely that when the water went out, the electricity went with it (OP will know). Therefore, if it's an electric heater, then it's not heating anything. However, it's still a good idea to flip the WH breaker off so that if power is restored before the water, the heater isn't burning itself up running empty. Of course, if it's gas (as shown in the image), the gas is still likely on, so it needs to be set to "vacation", "pilot", or just "off". (Source: my daughter is in TX right now and has been reporting power & H2O outages, either/or and simultaneous.)
Feb 18, 2021 at 14:40 comment added MonkeyZeus @Ecnerwal 504.1 of codes.iccsafe.org/content/IPC2018/…? I'll admit I never knew this rule...
Feb 18, 2021 at 14:20 comment added Ecnerwal IPC includes a requirement for a vacuum breaker on water heaters, but it seems to be an "oft-overlooked" part of code.
Feb 17, 2021 at 20:14 history edited MonkeyZeus CC BY-SA 4.0
added 46 characters in body
Feb 17, 2021 at 20:04 history edited MonkeyZeus CC BY-SA 4.0
added 305 characters in body
Feb 17, 2021 at 19:58 history answered MonkeyZeus CC BY-SA 4.0