Timeline for Handling unavoidable rust (probably?) contamination in arc welds
Current License: CC BY-SA 4.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jan 23, 2021 at 7:51 | comment | added | Solar Mike | When butt welding patch pieces, make them tightly fit the hole and the just bevel the edges enough to get a good weld. That way you don’t go through to the other side. | |
| Jan 23, 2021 at 5:44 | comment | added | Jason C | Thanks. I did mention FCAW, that's flux-core wire feed arc welding. Similar to mig but gas comes from flux inside the wire. :) Makes sense about the weld through and heat control. Although I'm not sure how to avoid contacting the other side when butt welding patch pieces into holes. Hmm. | |
| Jan 23, 2021 at 5:30 | history | answered | Michael Karas♦ | CC BY-SA 4.0 |