Timeline for Dryer vent height
Current License: CC BY-SA 4.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Dec 2, 2020 at 14:42 | comment | added | FreeMan | From the OP: "This install is on the 2nd floor with direct access to the attic." (emphasis added). | |
| Dec 2, 2020 at 7:12 | comment | added | James D | This is for a stacking washer dryer (dryer on top) located in the middle of the 2nd floor. Based on the location the best run for the vent was up in the attic and out the gable end, approx 20-25ft total with two 90 elbows. Chose to terminate the vent at the height of the actual dryer as to avoid the exhaust from venting down just to go back up when it gets to the wall. If the unit was side by side with the washer then I would have ended it on the ground level. | |
| Dec 2, 2020 at 6:11 | history | answered | Bluethunderbird | CC BY-SA 4.0 |