Timeline for Hanging kitchen cabinets on 2x3s
Current License: CC BY-SA 4.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Sep 15, 2020 at 19:32 | vote | accept | Mike | ||
| Sep 15, 2020 at 17:15 | comment | added | FreeMan | " If you run two lines with the board flipped at strategic locations, installing cabinets a breeze." Can you clarify that statement? Two lines of what? What board would be flipped and how would the OP do it? How would one identify strategic locations? Maybe I'm just being dense after a boring meeting... | |
| Sep 15, 2020 at 16:58 | comment | added | DMoore | @EdBeal - There are actually a lot of decent wide boxes at big box now for 2x3 applications - at least near me. The main issue I have is that I have a really really hard time getting good 2x3 quality near me unless I go to a lumber yard and even there I am picking out a lot of knots and curves. We still use 2x3 on outer walls in basements... why? Because I tell home owner I want to leave a gap, then they talk about not wanting to lose that inch. Its common now. Note - still will not use 2x3 in basement interior walls, you for sure notice a difference and hanging doors is a chore. | |
| Sep 15, 2020 at 16:54 | history | edited | DMoore | CC BY-SA 4.0 |
edited body
|
| Sep 15, 2020 at 16:51 | comment | added | Ed Beal | I agree and because of the sketchy quality I have laid 2x4 flat made several things easier but required more wire because I had to make splices above and have those boxes accessible. | |
| Sep 15, 2020 at 16:03 | history | answered | DMoore | CC BY-SA 4.0 |