Skip to main content
edited tags
Link
Mark
  • 291
  • 2
  • 8
  • 14
Source Link
Mark
  • 291
  • 2
  • 8
  • 14

How do I connect a 1/2" PVC slip joint to a 3/8" compression fitting on a sink faucet?

I'm trying to get water to my sink in an unconventional setup. I have a water tank and a water pump so I don't need a shutoff valve under the sink. I have 1/2" female PVC stubbed up, and I have the two female 3/8" compression connectors hanging down from the faucet with a merge connector bringing them into one (I won't have hot water). I'm just wondering what's the cheapest and easiest way to connect these two? I can't seem to find any connectors that would work. It would be easy but I can't figure out how to connect to the compression threading with anything that can go into 1/2" female PVC slip joint. I would really appreciate some help.

enter image description here