Timeline for Furnace Troubleshooting- Inconsistent Error Codes
Current License: CC BY-SA 4.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 10, 2020 at 1:28 | vote | accept | Joseph Filip | ||
| Nov 8, 2019 at 19:24 | comment | added | Joseph Filip | Before asking my question, I had examined and fiddled around with a couple of dozen possibilities. It still wasn't working, but now suddenly it is, and I haven't actually changed anything since it was NOT working while I was going through your suggestions. So I'm going to wait until it fails again and then carry on with your very helpful hints. | |
| Nov 8, 2019 at 5:28 | comment | added | Greg Hill | Sorry, I'm not familiar with the electrical specs of igniters to be able to say whether one form factor could be replaced by another (physical/mounting considerations aside). | |
| Nov 8, 2019 at 0:27 | comment | added | Joseph Filip | I will check out the suggestions in the link. I did get an Error Code 8- "Low flame sense signal" about 3 years ago. I removed the igniter, which looked fine until I was ready to put it back in place- one of the "tines" had broken off, probably by me when I set it down. Can the fragile "tine" type igniter be replaced by a sturdier-looking rod type? | |
| Nov 7, 2019 at 15:59 | history | answered | Greg Hill | CC BY-SA 4.0 |