Timeline for Replacing tongue and groove floorboards: but can't find a match
Current License: CC BY-SA 4.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 26, 2019 at 21:22 | comment | added | Dennis Williamson | @royal: The point is that a 1x4 is already 3/4 of an inch thick. There's a difference between 1" lumber and 4/4 lumber. | |
| Jul 26, 2019 at 14:44 | comment | added | royal | Where does the 3-3/4 comment come from? These are formed from standard 1x4s, that is, actual 3-1/2 by 3/4, as measured with both a measuring tape and a combination square. I do have experience with the table saw, but not yet the router. | |
| Jul 26, 2019 at 13:51 | history | edited | Ecnerwal | CC BY-SA 4.0 |
added 476 characters in body
|
| Jul 26, 2019 at 13:44 | history | edited | Ecnerwal | CC BY-SA 4.0 |
added 476 characters in body
|
| Jul 26, 2019 at 13:37 | history | answered | Ecnerwal | CC BY-SA 4.0 |