Timeline for Mounting Computer Under Particle Board Desk
Current License: CC BY-SA 4.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Oct 23, 2018 at 19:34 | comment | added | isherwood | I agree with your answer except that you'd almost never see screws in tension into such thin material. I wouldn't trust it, even with #14 screws. | |
| Oct 23, 2018 at 17:38 | comment | added | Gary Bak | This sounds good, but I'd add, use the thickest screw your computer mount supports and predrill the holes before screwing. Wrap your drill bit with tape just under 1/2 inch to be sure you don't drill too far. | |
| Oct 23, 2018 at 17:16 | history | answered | batsplatsterson | CC BY-SA 4.0 |