Timeline for How can I mount a Ring Pro on this door post?
Current License: CC BY-SA 4.0
11 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 6, 2020 at 15:15 | vote | accept | Sean Duggan | ||
| Jul 6, 2020 at 15:15 | answer | added | Sean Duggan | timeline score: 3 | |
| Sep 1, 2018 at 21:18 | comment | added | Sean Duggan | @jsotola: Indeed, the pictures don't do it justice. But yes, I have probed the interior and it's solid wood other than the bit that goes off to the right into the interior of the house. The prior owner was a DIYer, so I would not be surprised if this was his work. Unfortunately, he's been dead a few years, so I can't ask him any questions. | |
| Sep 1, 2018 at 20:32 | comment | added | jsotola | the picture does not show anything .... you have to probe inside the hole to determine if there is space behind the boards | |
| Sep 1, 2018 at 19:44 | comment | added | Sean Duggan | @jsotola: Unfortunately, it looks like they only added enough space for the wires. | |
| Sep 1, 2018 at 19:43 | history | edited | Sean Duggan | CC BY-SA 4.0 |
added 270 characters in body
|
| Sep 1, 2018 at 19:14 | comment | added | Sean Duggan | @jsotola: Ah. Thank you. I was just trying to make sure that you were doing the "follow the instructions for installation" when I was looking for a different question. | |
| Sep 1, 2018 at 19:08 | comment | added | jsotola | space inside the door post .... you do not have all the available information about the door post until you take off the push button switch and look inside the hole where the wires are | |
| Sep 1, 2018 at 18:29 | comment | added | Sean Duggan | @jstola: Is there something I should be looking for in the process? | |
| Sep 1, 2018 at 18:23 | comment | added | jsotola | start by detaching the doorbell switch from the door post | |
| Sep 1, 2018 at 18:04 | history | asked | Sean Duggan | CC BY-SA 4.0 |