Timeline for Is a tiny dent in a compressor tank a safety concern?
Current License: CC BY-SA 4.0
2 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Aug 20, 2018 at 18:46 | comment | added | Ed Beal | I would be afraid to use the tank if it pops back out. If the paint was not damaged the dent may have been there prior to being finished, pressure tanks are tested to 5/3 working pressure and on low pressure tanks they are usually much stronger than this value. | |
| Aug 20, 2018 at 18:36 | history | answered | fred_dot_u | CC BY-SA 4.0 |