Skip to main content
13 events
when toggle format what by license comment
Jun 2, 2018 at 18:00 comment added Jim Stewart Obviously one wants to insure that the installation is secure so the unit does not fall outside and land on a pet or a child (or even on an adult)!
Jun 2, 2018 at 17:55 comment added Jim Stewart Or this one youtube.com/watch?v=hGUH4PguUQM or youtube.com/watch?v=Fy5hwpBk_48
Jun 2, 2018 at 17:42 comment added Jim Stewart See youtube.com/watch?v=dcVOKSJBYPQ and others treating the same installation.
Jun 2, 2018 at 12:26 comment added Ed Beal @Jim Stewart With horizontal sliding Windows there is a large gap above the unit, I have not seen a unit that seals this area. But I prefer the foam to the thin plastic for some additional insulation.
Jun 1, 2018 at 23:13 answer added Ed Beal timeline score: 2
Jun 1, 2018 at 22:38 comment added Jim Stewart What is wrong with the installation kit that is conventionally used for these?
Jun 1, 2018 at 21:54 comment added catjacent Ah, that's where my mind was heading. I was eyeing this from a big box store...Owens Corning FOAMULAR 150 1 in. x 4 ft. x 8 ft. R-5 Scored Square Edge Insulating Sheathing. What do you recommend I use to fill small air gaps left over? Weatherstripping or caulk?
Jun 1, 2018 at 21:07 comment added Hari @EdBeal That should probably just be an answer
Jun 1, 2018 at 19:43 comment added Ed Beal I also like the rigid foam it is easy to cut to size. I did see a person that used plastic wrap and injected expanding foam, the plastic kept the spray foam from sticking to the window.
Jun 1, 2018 at 19:42 comment added Mazura The fins do nothing to insulate but they're a 1000x better than cloth at air infiltration. Until you've air-sealed, r-value is meaningless.
Jun 1, 2018 at 19:33 history edited catjacent CC BY-SA 4.0
deleted 1 character in body
Jun 1, 2018 at 19:33 comment added Jimmy Fix-it Thick foam insulation panel, cut to size, is what I use.
Jun 1, 2018 at 19:27 history asked catjacent CC BY-SA 4.0