Timeline for PIR motion sensor interference by nearby CFL
Current License: CC BY-SA 3.0
10 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Nov 4, 2018 at 1:42 | vote | accept | GreatKing | ||
Nov 4, 2018 at 1:34 | vote | accept | GreatKing | ||
Nov 4, 2018 at 1:42 | |||||
Oct 31, 2018 at 11:00 | history | bumped | CommunityBot | This question has answers that may be good or bad; the system has marked it active so that they can be reviewed. | |
Mar 16, 2018 at 23:43 | comment | added | dandavis | to expand on jstoola's comment, adjust the light-sensitivity dial all the way to one side or the other (try both). that should fix it. aside: LEDs are cheaper than CFLs around here, try shopping around more. | |
Mar 16, 2018 at 2:29 | comment | added | jsotola | look at the rightmost picture on the ebay link that you posted | |
Mar 15, 2018 at 22:50 | comment | added | Ken | The device is not UL listed nor does it have any other certification. | |
Mar 15, 2018 at 22:17 | answer | added | Ken | timeline score: 0 | |
Mar 15, 2018 at 19:49 | comment | added | Harper - Reinstate Monica | Most motion sensors have a light detector also: the idea is, don't turn the light on if there's a lot of natural light. I suspect your brighter bulb is making the motion sensor think it's daylight. Normally motion sensors calibrate themselves to "normal here"based on 24hour cycles, that won't work here. I can't tell if this even has that feature because the product description is cheap Cheese, as is the product itself, unfit for use in mains power. Literally illegal (NEC 110.3 in USA). | |
Mar 15, 2018 at 19:03 | review | First posts | |||
Mar 16, 2018 at 21:45 | |||||
Mar 15, 2018 at 18:59 | history | asked | GreatKing | CC BY-SA 3.0 |