Skip to main content
Home Improvement

Return to Question

Commonmark migration
Source Link
Community Bot
Community Bot
  • 1

My home has two water tanks (side by side), one used by the owner and one used by us. Unfortunately for us, the owner has a good supply of water and we don't. I have asked him to connect the two tanks at the bottom through a pipe so that we too would get enough water, but he doesn't want to as he thinks its too much work.

Now, I am looking for a way to connect the two tanks somehow, so that the water level in them is the same at all times. I know that I can use a pipe to suck out water and put it in my tank to level the tanks temporarily. However, this doesn't work in the long run. Any ideas would be greatly appreciated.

Edit:

##Edit: TheseThese two tanks are on the top of a three storied building.

My home has two water tanks (side by side), one used by the owner and one used by us. Unfortunately for us, the owner has a good supply of water and we don't. I have asked him to connect the two tanks at the bottom through a pipe so that we too would get enough water, but he doesn't want to as he thinks its too much work.

Now, I am looking for a way to connect the two tanks somehow, so that the water level in them is the same at all times. I know that I can use a pipe to suck out water and put it in my tank to level the tanks temporarily. However, this doesn't work in the long run. Any ideas would be greatly appreciated.

##Edit: These two tanks are on the top of a three storied building.

My home has two water tanks (side by side), one used by the owner and one used by us. Unfortunately for us, the owner has a good supply of water and we don't. I have asked him to connect the two tanks at the bottom through a pipe so that we too would get enough water, but he doesn't want to as he thinks its too much work.

Now, I am looking for a way to connect the two tanks somehow, so that the water level in them is the same at all times. I know that I can use a pipe to suck out water and put it in my tank to level the tanks temporarily. However, this doesn't work in the long run. Any ideas would be greatly appreciated.

Edit:

These two tanks are on the top of a three storied building.

added 73 characters in body
Source Link
Khaja Minhajuddin
Khaja Minhajuddin
  • 131
  • 1
  • 1
  • 5

My home has two water tanks (side by side), one used by the owner and one used by us. Unfortunately for us, the owner has a good supply of water and we don't. I have asked him to connect the two tanks at the bottom through a pipe so that we too would get enough water, but he doesn't want to as he thinks its too much work.

Now, I am looking for a way to connect the two tanks somehow, so that the water level in them is the same at all times. I know that I can use a pipe to suck out water and put it in my tank to level the tanks temporarily. However, this doesn't work in the long run. Any ideas would be greatly appreciated.

##Edit: These two tanks are on the top of a three storied building.

My home has two water tanks (side by side), one used by the owner and one used by us. Unfortunately for us, the owner has a good supply of water and we don't. I have asked him to connect the two tanks at the bottom through a pipe so that we too would get enough water, but he doesn't want to as he thinks its too much work.

Now, I am looking for a way to connect the two tanks somehow, so that the water level in them is the same at all times. I know that I can use a pipe to suck out water and put it in my tank to level the tanks temporarily. However, this doesn't work in the long run. Any ideas would be greatly appreciated.

My home has two water tanks (side by side), one used by the owner and one used by us. Unfortunately for us, the owner has a good supply of water and we don't. I have asked him to connect the two tanks at the bottom through a pipe so that we too would get enough water, but he doesn't want to as he thinks its too much work.

Now, I am looking for a way to connect the two tanks somehow, so that the water level in them is the same at all times. I know that I can use a pipe to suck out water and put it in my tank to level the tanks temporarily. However, this doesn't work in the long run. Any ideas would be greatly appreciated.

##Edit: These two tanks are on the top of a three storied building.

Tweeted twitter.com/#!/StackDIY/status/180301891140468736
Source Link
Khaja Minhajuddin
Khaja Minhajuddin
  • 131
  • 1
  • 1
  • 5

How to keep two water tanks have maintain the same water level?

My home has two water tanks (side by side), one used by the owner and one used by us. Unfortunately for us, the owner has a good supply of water and we don't. I have asked him to connect the two tanks at the bottom through a pipe so that we too would get enough water, but he doesn't want to as he thinks its too much work.

Now, I am looking for a way to connect the two tanks somehow, so that the water level in them is the same at all times. I know that I can use a pipe to suck out water and put it in my tank to level the tanks temporarily. However, this doesn't work in the long run. Any ideas would be greatly appreciated.