Timeline for HVAC blower comes on by itself. Even after thermostat has been disconnected from wall. EDIT- POSSIBLY FIXED
Current License: CC BY-SA 3.0
14 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Oct 18, 2018 at 23:33 | comment | added | user70085 | If you test the thermostats housings prongs you probably would of noticed continuity to the green wire or O.L | |
| Oct 18, 2018 at 23:26 | comment | added | user70085 | Put a toggle switch on the green wire, that way if there's an error like that again you are able to manually turn the fan on and off with a 2nd switch rather than just depending on the thermostats switch or run a 2nd wire from the transformers 24v to the green wire for direct on and off | |
| Oct 9, 2017 at 21:28 | answer | added | petroke | timeline score: 1 | |
| Oct 9, 2017 at 21:24 | history | edited | petroke | CC BY-SA 3.0 |
Problem Isolated- shorts in line
|
| Oct 8, 2017 at 21:38 | history | edited | petroke | CC BY-SA 3.0 |
added pics of wiring diagram
|
| Oct 8, 2017 at 19:37 | comment | added | Ken | @petroke - Login - Edit your question - click the bottom area of text - click the picture symbol on the toolbar and it will add the picture. If not there are picture sights you can add to and submit the link there as well.. | |
| Oct 8, 2017 at 12:50 | comment | added | petroke | make that upload to site not sight. | |
| Oct 8, 2017 at 12:47 | history | edited | petroke | CC BY-SA 3.0 |
added 55 characters in body
|
| Oct 8, 2017 at 12:44 | comment | added | petroke | I do not have a heat recovery or transfer installed. have pics of wiring diagram just figuring out how to download right now. Seems the pics are too big to upload to sight. have to redo- but @Ken thanks for info on where to get the diagram. Also the flashing codes- the light flashes slowly- which per the code seems to be 'normal'. | |
| Oct 7, 2017 at 14:11 | comment | added | Retired Master Electrician | Do you have a heat recovery or a heat transfer installed on this system? | |
| Oct 7, 2017 at 9:02 | comment | added | Ken | @petroke If you remove the front panel on the furnace you will see the wiring diagram along with the flashing codes. Post a good picture of that please.. | |
| Oct 6, 2017 at 22:22 | comment | added | ThreePhaseEel | Can you post a wiring diagram for your unit? | |
| Oct 6, 2017 at 20:53 | review | First posts | |||
| Oct 9, 2017 at 17:35 | |||||
| Oct 6, 2017 at 20:51 | history | asked | petroke | CC BY-SA 3.0 |