Timeline for Door handle not opening fully (not retracting door latch)
Current License: CC BY-SA 3.0
11 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Dec 1, 2020 at 21:07 | vote | accept | Shinobii | ||
| Dec 1, 2020 at 21:07 | answer | added | Shinobii | timeline score: 0 | |
| Jun 30, 2017 at 0:37 | comment | added | The Evil Greebo | Your door hardware may simply not have been aligned properly. | |
| Jun 29, 2017 at 19:59 | comment | added | Shinobii | Ah, then no. There is no toggle button or anything I can do to the handle (as far as I know) | |
| Jun 29, 2017 at 19:58 | comment | added | brhans | No - the handle you're holding in the photo. | |
| Jun 29, 2017 at 19:54 | comment | added | Shinobii | The door insert? It does retract when the door handle is inserted. Just not fully. Is this what you are referring to? | |
| Jun 29, 2017 at 19:52 | comment | added | brhans | Aaand - just so we can get the obvious out of the way - if you turn that knob you're holding in the photo over there isn't a little button/twisty-thingy which you can push/toggle/turn ... ? | |
| Jun 29, 2017 at 19:48 | comment | added | Shinobii | If all I need to do is buy a new inner door piece (or handle set) I guess I can do that relatively cheaply. Just find it strange. | |
| Jun 29, 2017 at 19:47 | comment | added | Shinobii | Yes it does! It's just that (from what I gather) the door handle has a metal piece that prevents it from turning it enough. | |
| Jun 29, 2017 at 19:45 | comment | added | brhans | What does the part (still in the door) which this fits into look like? If you jam a large screwdriver (or whatever fits) into that part and rotate it about 45 degrees, does the latch retract appropriately? | |
| Jun 29, 2017 at 19:36 | history | asked | Shinobii | CC BY-SA 3.0 |