Timeline for What's the right type of lumber to construct a small TV platform?
Current License: CC BY-SA 3.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 10, 2017 at 14:28 | vote | accept | Dov | ||
| Apr 6, 2017 at 18:41 | comment | added | mmathis | @Dov all you need to joint edges on a router is a straight bit and a split fence. You essentially create a jointer on its side; search youtube or ask another question here or at woodworking.stackexchange.com for more details. You can put a decorative edge on plywood with a router, especially since you're going to paint. Nothing wrong with that. | |
| Apr 6, 2017 at 18:34 | comment | added | Dov | Thanks a lot for the thorough answer. I do actually have a router, though I don't think I have any joining bits for it yet. I was planning on routing the top edges of it for a nicer look. That would probably rule out the plywood. | |
| Apr 6, 2017 at 16:19 | history | answered | mmathis | CC BY-SA 3.0 |