Timeline for How do I change the bulb
Current License: CC BY-SA 3.0
7 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Sep 30, 2016 at 14:49 | comment | added | Carl Witthoft | Cue the "how many SE readers does it take to change a light bulb" responses :-) | |
| Sep 30, 2016 at 13:27 | answer | added | Mike | timeline score: 1 | |
| Sep 29, 2016 at 21:59 | comment | added | Tyson | there not just a G40 or G30 that unscrews are they? | |
| Sep 29, 2016 at 18:44 | comment | added | Andrew Morton | What country are you in? First, get a working torch. Switch off the electricity supply to that fixture at the fusebox - there are likely to be "circuit breakers" for several electrical circuits. They should be labelled as to what they do. Switch on the light so that the remaining bulbs are illuminated, then switch off the appropriate circuit breaker. Confirm that the light has gone off before proceeding. | |
| Sep 29, 2016 at 18:18 | comment | added | mmathis | Welcome to DIY.SE! Can you post a picture or two from the side? There may be some set screws holding the bowl on, that would be just below the ceiling. In fact, it looks like there may be one at the bottom of the picture, just to the left of the while orb... | |
| Sep 29, 2016 at 18:12 | review | First posts | |||
| Sep 30, 2016 at 0:34 | |||||
| Sep 29, 2016 at 18:04 | history | asked | Lee Ream | CC BY-SA 3.0 |
