3

I have a cinder block fence in my front yard that has two courses of cinder block and a row of cap blocks. It is about 24" high. It is set on a very nice, solid cement footer. I want to add a 48" chain link on top of it. If I drill holes to accommodate my corner and line posts, and break out the mortar that has probably filled the interior sections of the cinder blocks all the way to the footer and set them in cement, would the harder cement support for the posts take enough of the stress off the bricks to keep it from cracking the rest of the cinder block fence?

2
  • 1
    What stress would be put on the fence? I would hope people aren't standing or hopping the fence, especially since a nice 24" + fence height will exist on one side. Nov 30, 2012 at 15:25
  • 1
    purely an aesthetic suggestion, but maybe consider stepping the fence back a couple of feed from the wall and using that space as a mulch bed for flowers/ small shrubs. I'd worry a chainlink fence on top of cement block might begin feeling a little 'prison yard-ish'. ;)
    – DA01
    Nov 30, 2012 at 19:19

2 Answers 2

1

I would get posts for a six foot fence to compensate for the wall height. Then anchor the posts in the ground. Then set the fence height to be level with the cap. If they didn't fill the blocks, the caps aren't thick enough to get a good length of anchor in.

0

You could go with something like this deck mount base:

enter image description here

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.