93 reputation
7
bio website
location Michigan
age 25
visits member for 1 year, 10 months
seen Sep 16 at 14:19

Im currently a programmer with previous electrical experience of 4 years along with a few cs degrees. I love electrical but decided to not go that route and finish up my education. I have so much respect for all trades and find them very interesting. Im just on here to help and learn as much as possible.


Aug
29
awarded  Scholar
Aug
29
accepted Is a weather resitant gfci required outside in a metal box with in use cover?
Aug
28
revised Did I make a mistake with this fluorescent light installation?
spelling and grammar mistakes
Aug
28
asked Is a weather resitant gfci required outside in a metal box with in use cover?
Jun
10
awarded  Commentator
Jun
10
comment What trim material can be used around a 6" circular permanent hole in drywall?
you can try a 6 3/8" hole saw maybe use the flexible drywall bead and then mud it.
Jun
10
answered What trim material can be used around a 6" circular permanent hole in drywall?
Jun
4
comment Can I feed a 30 amp plasma cutter from this 50 amp subpanel?
how will you be using the plasma cutter? Will you be running it while the any of the other things are running? You could if nothing else was running. If the compressor or freezers kick on while using your plasma cutter there will be a spike in draw and probably trip the breaker on your main that feeds the sub panel
Nov
9
awarded  Popular Question
Feb
8
answered How do I replace a broken halogen bulb in the recessed light in my bathroom?
Jan
7
comment What could cause my ceiling fan light to go off after 2 seconds of being on?
what kind of light bulb is in there? what is the fixtures recommended wattage and what wattage of bulb/bulbs do you have in there? is it a new fan or existing fan? if it was an existing fan did it just start happening? this is a pretty vague description i would need a little more info to help. could be a few things.
Dec
27
awarded  Student
Dec
27
comment Should light bulbs above showers be “steam proof”?
does the recessed can have a glass or plastic cover that is built into the trim piece? or is it just a open can with the bulb exposed?
Dec
27
comment What could be causing my bedroom to be so cold, and how can I make it warmer?
it is in the living room which is on the main floor and yes it seems to warm faster than the rest of the place...
Dec
26
comment What could be causing my bedroom to be so cold, and how can I make it warmer?
yes i am getting airflow. its usually set to 70ish degrees. when i put my hand over the register it doesn't feel like 70 but maybe it is. its defiantly warmer air than the air in my room. see thats why its so confusing to me. it warms it up but not as efficiently as last year. which it shouldn't be with a new furnace. It almost has to be set to 75 to be comfortable and that should not be necessary..idk maybe im wrong. is 75 to high to be comfortable? I live in metropolitan Detroit by the way so ya its 25 degrees outside
Dec
26
comment What could be causing my bedroom to be so cold, and how can I make it warmer?
Nothing has changed in my room other than i moved a desk kind of closer to my cold air return. i had a desk before that had a solid wall for essentially the legs of the desk. now i have a desk from IKEA that is in the same spot that doesn't have a full wall as the legs it has like those 12" x 12" storage cube things there. The bottom ones have a small box in the opening of the cube that i could not see blocking airflow. Could restriction to the cold air return cause my room to be colder?
Dec
26
comment What could be causing my bedroom to be so cold, and how can I make it warmer?
Just regular heat..with registers
Dec
26
revised What could be causing my bedroom to be so cold, and how can I make it warmer?
added 13 characters in body
Dec
26
asked What could be causing my bedroom to be so cold, and how can I make it warmer?
Dec
5
answered How to stop cold air from coming into the house