meta user
network profile
| bio | website | |
|---|---|---|
| location | ||
| age | 26 | |
| visits | member for | 8 months |
| seen | Mar 10 at 5:45 | |
| stats | profile views | 3 |
|
Mar 10 |
answered | How to remove screws with stripped heads? |
|
Dec 21 |
comment |
What should I use as a base for my wall mounted PC case? I have created a meta discussion for it.. |
|
Dec 21 |
revised |
What should I use as a base for my wall mounted PC case? Improved grammar and added tags |
|
Dec 21 |
awarded | Editor |
|
Dec 21 |
revised |
What should I use as a base for my wall mounted PC case? Improved code formatting |
|
Dec 21 |
comment |
What should I use as a base for my wall mounted PC case? @Tester101 Aha I thought so too.. But where could/would it get migrated too..? Ideally we need a site for DIY from scratch projects. |
|
Dec 21 |
comment |
What should I use as a base for my wall mounted PC case? Yes, will do that. Is there any place I can get an explanation on what a standoff is ..? I googled a bit but it is not clear if it acts as an insulator.. |
|
Dec 21 |
comment |
Why does my washing machine leak only during the spin cycle? What does your washing-machine sit on? Is it firmly sitting on the floor or on a trolley? Trolleys tend to cause the machine to wobble more than usual and end up loosening the drainage system.. besides causing a host of other problems. |
|
Dec 21 |
revised |
What should I use as a base for my wall mounted PC case? edited tags |
|
Dec 21 |
revised |
What should I use as a base for my wall mounted PC case? Improved grammar and added tags |
|
Dec 21 |
awarded | Student |
|
Dec 21 |
comment |
What should I use as a base for my wall mounted PC case? Sounds like a good plan Michael, thanks. I will also have to consider whether it is safe/recommended to mount the electronics on a copper sheet. But I guess the coating would act as an insulation? |
|
Dec 21 |
awarded | Supporter |
|
Dec 21 |
comment |
What should I use as a base for my wall mounted PC case? This is my first post here, so do let me know how I can improve it so it meets the requirements mentioned in the FAQ section.. Thanks |
|
Dec 21 |
asked | What should I use as a base for my wall mounted PC case? |
