123 reputation
4
bio website
location
age
visits member for 1 year, 10 months
seen May 29 at 20:46

Apr
22
comment How can I join vinyl decking to metal door frame?
Thanks for the answer -- I agree I'll have to get this fixed properly or I'll regret it. The vinyl does go up the wall on either side of the doorframe, but sadly the "deck expert" built the deck floor to the same height as the frame threshold so there is no wall to go up under the frame, hence the seam that is the source of my woe. I'll probably take @TheEvilGreebo's advice to Replace the door. In the process, raise the rough opening of the door frame half an inch or so - however much is necessary to be able to put a proper piece of flashing under the door frame and over the vinyl.
Sep
28
comment How do I make a height adjustable desk?
+1 (wish I could give you +10) for a standing desk coupled with a tall chair. Height-adjustment is over-engineering for such a simple problem. Imagine for a moment: how often do you honestly feel like you'll re-adjust the height if it takes any significant effort? If it was me, the fancy desk would end up staying permanently at one height.
Sep
27
awarded  Scholar
Sep
27
awarded  Supporter
Sep
27
accepted How can I join vinyl decking to metal door frame?
Sep
27
awarded  Student
Sep
27
comment How can I join vinyl decking to metal door frame?
Built in '89. I've never removed a door frame but if it needs to be done I'd give it a try. My only hesitation is the possibility of creating a bigger problem that I can't fix...
Sep
27
awarded  Editor
Sep
27
revised How can I join vinyl decking to metal door frame?
Added extra photos by request
Sep
27
asked How can I join vinyl decking to metal door frame?