123 reputation
116
bio website
location
age
visits member for 2 years, 6 months
seen Nov 25 at 22:00

Oct
23
comment How can I stop heat loss due to an uninsulated porch?
Just an update. I didn't do anything and left the radiator on in the porch. However, because the rest of the house is well insulated and the furnace did not need to kick on frequently, the radiator froze and began leaking. I just had to remove the radiator all together. Pro tip: Don't install a radiator in an un-insulated porch (Don't blame me, it came with the house)
Feb
22
comment How can I stop heat loss due to an uninsulated porch?
I agree that this is probably the best long term solution. I'm also looking for short term solutions for this winter. I'm not really too enthusiastic about taking apart my heating system until the summer, when I have plenty of time to deal with it.
Feb
22
comment How can I stop heat loss due to an uninsulated porch?
Forced hot water, not steam.
Jun
22
comment Can I share a 240V outlet between two devices?
Apparently after more research, the outlet could be 250v instead of 240. I'll try to confirm this.
Jun
22
comment Can I share a 240V outlet between two devices?
I get the idea, I think I need the NEMA 10-50p connectors, but I'm assuming it would be a similar setup.
Jun
22
comment Can I share a 240V outlet between two devices?
I havn't been able to find any Y-cables that support the 10-50P connectors.
Jun
22
comment Can I share a 240V outlet between two devices?
I may have been incorrect. It's likely 240 volt US for the dryer and welder. The connector is a 3 prong plug with 3 flat prongs, I believe the plug is called 10-50P.
Jun
22
comment Can I share a 240V outlet between two devices?
Yes, I am in the US.