1,534 reputation
411
bio website
location
age
visits member for 2 years, 8 months
seen Oct 8 '12 at 22:46

Sep
2
comment What exactly is magnetic drilling equipment?
Gosh, all those Jaguars I own, and I've never busted a head stud.
Aug
30
comment Does it do any good to use fiberglass insulation if you're not going to drywall?
Don't you want closed-cell foam then?
Aug
29
comment Does it do any good to use fiberglass insulation if you're not going to drywall?
I don't get what you say about vents and a "hot roof". I think when you add insulation to a cavity, you don't want any air movement in it. Sprayfoam will be the same as fibergalss and sheetrock, but more expensive.
Aug
29
answered How can I remove water-based emulsion paint from paving slabs?
Aug
29
answered What wood protection should I use for a kids swing set in the desert sun?
Aug
26
comment What is the name of ducting I am looking for if they even make it?
Nice website, Cheech.
Aug
24
answered Should the support structure for a kitchen island be built on top of tiles?
Aug
24
comment Should the support structure for a kitchen island be built on top of tiles?
Is it going to be 36" or 42" tall? Is he planning to attach it to the floor, or leave it loose?
Aug
23
comment How to reduce brightness of recessed LED?
Sounds like waaay too much wire coming into a single box
Aug
23
comment How can I install a pre-hung door when soundboard has been installed?
Sand the joint flush and this should look great. Leaving a "reveal" is still the easiest thing to do, though. No gluing or sanding.
Aug
23
answered How to reduce brightness of recessed LED?
Aug
23
comment How to reduce brightness of recessed LED?
Not very sure what the situation with the switches is, and why you can't add another dimmer that only dims the LED bulb. Can you explain a bit more?
Aug
23
comment What packing material to use between a brick and house beam?
Steel works, but wouldn't wood shims be cheaper? You can cut them the exact size you want, and even treat them if you think you need to.
Aug
23
revised How should I cut these speaker stands down to size?
restore original
Aug
22
comment How should I cut these speaker stands down to size?
accidentally added to your post - hopefully it will get properly restored
Aug
22
suggested suggested edit on How should I cut these speaker stands down to size?
Aug
22
revised How should I cut these speaker stands down to size?
add more explanation
Aug
22
revised How should I cut these speaker stands down to size?
added 391 characters in body
Aug
22
suggested suggested edit on How should I cut these speaker stands down to size?
Aug
22
answered How should I cut these speaker stands down to size?