network profile
| bio | website | |
|---|---|---|
| location | Midwest | |
| age | 26 | |
| visits | member for | 1 year, 6 months |
| seen | Nov 3 '12 at 19:35 | |
| stats | profile views | 9 |
Skills
- C#
- WPF
- WinForms
- Visual Studio
- ReSharper
- git
Interests
- Travel & Cultures
- Guitar
- Exercise
|
Nov 3 |
comment |
When does an under the sink P-Trap assembly need venting? google: plumbing air admittance valve |
|
Nov 3 |
comment |
Why do I have a large PVC pipe venting warm air outside intermittently? maybe put some lattice around the vents some kind of barrier between the deck and vents |
|
Nov 3 |
comment |
How can I replace these light switches? it'd help if you'd draw a picture. the "hole in the back" is almost always an alternate to the screw beside it, allowing easier installation. you should look into how exactly a switch works. finally, i'd recommend buying a non-contact voltage tester; it'll tell you which wire(s) are from the source (prob wire 2) and which are going to the lights. |
|
May 1 |
comment |
My house has steel “2x4s” in the walls, can I hang cabinets, a TV, or some other heavy item from them? think about all the weight that stud is already carrying.. shingles + roof and side sheathing + siding + etc. Of course, the weight is distributed across a bunch of them |
|
Apr 20 |
comment |
Is there a way to sound proof my basement while I've got part of the ceiling open? "sound proof" was probably a little high-hoping for my situation. "better sound proof" |
|
Apr 20 |
awarded | Scholar |
|
Apr 20 |
accepted | Is there a way to sound proof my basement while I've got part of the ceiling open? |
|
Apr 20 |
answered | Is there a way to sound proof my basement while I've got part of the ceiling open? |
|
Apr 8 |
awarded | Teacher |
|
Apr 7 |
comment |
Mould on the inside of a bitumen corrugated sheet the top side looks normal then? is the top side a different finish (e.g. waterproofing)? in any event, ventilation is a good idea.. |
|
Apr 7 |
comment |
How can I cut through brick to add a window? try this page, 3rd post |
|
Apr 7 |
comment |
Mould on the inside of a bitumen corrugated sheet the coloration and pattern definitely makes it look like mold. can you take a cotton swab and scrape some off or is the coloration inside/part of the roof? also, if you have no ventilation, it may (or may not) be a good idea to to take out some bricks in the top rows. maybe every 4th or 5th or something to give it an aesthetic appearance (as well as functional).. |
|
Apr 7 |
comment |
Does anything need to be done to prep the ground before building a low height deck? more durable; no splinters; doesn't warp; keeps color. my family has a small lake cabin that used to have an old wood deck. man, if you didn't wear sandals on that thing, you were priming for a splinter. we replaced it with a composite deck and it's worlds better. it is a high traffic area, whereas yours might be used a lot less... |
|
Apr 6 |
comment |
Does anything need to be done to prep the ground before building a low height deck?landscape fabric, 1" sand, small air gap, composite deck |
|
Apr 6 |
comment |
Does anything need to be done to prep the ground before building a low height deck? I've heard landscape fabric then 1" sand over the top. |
|
Apr 6 |
answered | Is it possible to refinish floors one room at a time? |
|
Apr 6 |
comment |
Is it possible to refinish floors one room at a time? putting in transition strips will ruin the flow that continuous wood floors give you |
|
Feb 3 |
comment |
Can I hang a bathroom shelf with command strips or something similar? if it says in the agreement "any holes larger than a standard hanging nail will result in a total charge of $75" OR "$37.50 /large hole", then the challenge would surely fail. |
|
Jan 20 |
comment |
Can I hang a bathroom shelf with command strips or something similar? you could have definitely challenged that. |
|
Jan 19 |
comment |
Can I hang a bathroom shelf with command strips or something similar? landlords can't charge too much for spackling, paint, and "labor". |
