121 reputation
4
bio website google.com
location United States
age 24
visits member for 3 years, 6 months
seen Mar 19 '13 at 4:16

profile for David at Super User, Q&A for computer enthusiasts and power users

I'm a Support Administrator (T1 and T2 support) for a datacenter which specializes in VMware virtualization. I'm also a hard core gamer. I play the PS3 (soon to probably switch to PS4) and I play PC.

My Current Gaming Rig:

Harware

  • Case: RAIDMAX Quantum ATX-798WB
  • PSU: RAIDMAX HYBRID 2 RX-730SS 730W
  • HDD: 1 x Western Digital WD Black WD1001FALS 1TB (For storage)
  • HDD: Kingston HyperX 3K SH103S3/120G 2.5" 120GB (For OS)
  • Motherboard: ASUS M5A78L-M LX PLUS AM3+ AMD 760G Micro ATX AMD Motherboard
  • RAM: CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 1600
  • CPU: AMD FX-8120 Zambezi 3.1GHz 8-core
  • Monitors: 2 x LG 27EA33V Black 27" 5ms HDMI Widescreen LED Backlight LCD Monitor, IPS-Panel
  • Graphics Card: EVGA 04G-P4-2686-KR GeForce GTX 680 w/ Backplate 4GB 256-bit GDDR5

Peripherals

  • Mouse: Razer DeathAdder
  • Kayboard: Razer BlackWidow Ultimate 2012 Mechanical
  • Mouse Pad: Razer Manticor

Feb
28
comment How can I unbend a bent furnace filter slot?
@bcworkz: Thanks for your comment. I will see if I can make a shim and a hammer do the job. I was thinking a huge piece of wood for some reason. Thanks again!
Feb
27
comment How can I unbend a bent furnace filter slot?
Hi @bib, I have added a nice picture of the scenario. Do you have any ideas for bending the top lip upward after seeing the updated picture? It is difficult to get anything in there to bend the top lip upwards....
Feb
27
comment How can I unbend a bent furnace filter slot?
@KevinReid, Sorry for the delay. I had some crazy stuff happen and spaced this. I have updated the picture. It looks MUCH better now.
Feb
27
revised How can I unbend a bent furnace filter slot?
Update picture
Feb
14
comment How can I unbend a bent furnace filter slot?
Hi @KevinReid, Thank you for your comment. I will try to get another picture tonight and update it. It is dark in my garage. I took around three pictures, and this was the best of the three. I will see if I can get some extra lighting in there.
Feb
13
awarded  Editor
Feb
13
revised How can I unbend a bent furnace filter slot?
added 118 characters in body
Feb
13
awarded  Supporter
Feb
13
comment How can I unbend a bent furnace filter slot?
That is a great idea, but the exhaust stack goes in front of the area where you put the furnace filter in (almost to the point where you can't replace the furnace filter)... I am going to take a picture to show the layout of my furnace.
Feb
13
comment How can I unbend a bent furnace filter slot?
I tried using a set of vice grips a couple days ago, but it didn't really help. I couldn't really position them well enough. If I can remember, I am going to take a picture and upload it so people can see the odd predicament I am in.
Feb
12
awarded  Student
Feb
12
asked How can I unbend a bent furnace filter slot?
Dec
29
awarded  Autobiographer