Reputation
312
Top tag
Next privilege 500 Rep.
Access review queues
Badges
1 9
Newest
 Quorum
Impact
~2k people reached

Jan
10
comment What is this mystery component
Ridiculous migration are you kidding?
Nov
29
awarded  Quorum
Nov
29
comment Hanging pictures/mirrors to drywalls without leaving big holes
Removing self-drilling drywall screw anchors is a bad idea. The hole will be huge. depending on how you do it. Generally, you want to cut the head/lip off, or push it in flat, then spackle right on top. If you really want you can push it into the wall so it falls out INSIDE the wall. you never want to pull it out See youtube.com/watch?v=yUzfOLzRIPc or debbie-debbiedoos.com/2013/08/…
Nov
29
awarded  Custodian
Nov
29
reviewed Edit How do I read the markings printed on the outside of electric wires?
Nov
29
revised How do I read the markings printed on the outside of electric wires?
Copy edits and adding the cyrillic “Я.”
Nov
28
awarded  Yearling
Nov
28
answered What is the name for the section of vertical tiling underneath a bay window?
Nov
28
comment How do I read the markings printed on the outside of electric wires?
Updated to reflect that.
Nov
28
revised How do I read the markings printed on the outside of electric wires?
added 92 characters in body
Nov
28
awarded  Explainer
Nov
28
revised Removing counter sunk metal security Torx head screws
typo, unnecessary noun
Nov
28
answered How do I read the markings printed on the outside of electric wires?
Nov
28
answered How do I read the markings printed on the outside of electric wires?
Nov
28
comment How do I read the markings printed on the outside of electric wires?
You've asked two separate questions (How to read the markings, and if you can use those connectors) in a single question. Typically, these unconnected questions should be asked individually.
Nov
28
revised How do I rewire a switched receptacle and make it permanently hot
added 274 characters in body
Nov
28
answered How do I rewire a switched receptacle and make it permanently hot
Nov
28
comment Removing counter sunk metal security Torx head screws
An EDM is essentially a welding CNC. That might be a bit excessive.
Nov
28
comment Traditional Recessed Lights or the New “clip” LED Panels?
Your asking if you'll experience early adopters regret, it's too early to say... Either your okay with being an early adopter and risking unknown failure rates, or your not and are okay with sticking to proven tech. As a commercial UL product it's not likely to catch on fire and burn, but it may fail to provide the light you want early.
Nov
28
comment Is it safe to mix LEDs and incandescents in a chandelier?
the high current induced by the dimmer. current is pulled not pushed. It can't be induced.