Reputation
281
Top tag
Next privilege 300 Rep.
Create new tags
Badges
3 18
Impact
~13k people reached

Jun
28
revised How do I attach a new Rain Sensor to my ancient Hydrotek sprinkler timer?
added 124 characters in body
Jun
28
asked How do I attach a new Rain Sensor to my ancient Hydrotek sprinkler timer?
Jun
6
accepted How do I use the rubber strap with my drill's chuck key?
Jun
4
comment What is purpose of the slot at the base of my drill's handle?
Citation needed?
Jun
4
revised What is purpose of the slot at the base of my drill's handle?
deleted 2 characters in body; edited title
Jun
4
revised What is purpose of the slot at the base of my drill's handle?
added 36 characters in body
Jun
4
comment What is purpose of the slot at the base of my drill's handle?
@TXTurner - It is, indeed, a DWD210G; I also found no mention of it in the manual, which is why I came here. :-)
Jun
4
comment What can I do about minimizing small shards of ice shooting out the ice dispenser on LG refrigerator?
I recently purchased a brand new LG fridge, and the small trapdoor that the ice comes out of did not open until excessive ice weight sat on it. This caused small bits of ice to flake out and water to melt down. I was told by the LG-sourced repairman (under warranty!) that this was due to some of the fridges being shipped with bad motors for the trapdoor. He replaced the motor, and now the trapdoor opens perfectly and we get ice just fine. Check whether or not your trapdoor opens properly.
Jun
4
asked What is purpose of the slot at the base of my drill's handle?
Jun
4
revised How do I use the rubber strap with my drill's chuck key?
added 81 characters in body
Jun
4
comment How do I use the rubber strap with my drill's chuck key?
I sort of understand your description. Does it hook at all into the slot on the bottom of the drill handle? Can you provide a photo or image of what the result should look like?
Jun
4
accepted How do I source, remove, and prevent green mold on my aluminum windows?
Jun
4
comment How do I source, remove, and prevent green mold on my aluminum windows?
@James - it slopes away. After bleaching the heck out of it and scraping/scrubbing it clean, 2 dry days later, I used clear silicone to seal the bottom and up the sides. It was fine last I checked, but I've moved homes since, so this is no longer my problem. I appreciate the help and probably would have used a fungicidal paint additive instead.
Jun
4
accepted How can I prevent my refrigerator door from hitting the wall?
Jun
4
comment How can I prevent my refrigerator door from hitting the wall?
They only sell them in 8-foot increments, so I bought one (for around $2.00) and tested it. Seems to not scratch the door, but it might be an eyesore, so we'll see if I use a lot of it (for consistency) or a little of it. I will apply it with clear silicone after the kitchen is painted (late June, early July), and update my answer then with the results.
Jun
4
asked How do I use the rubber strap with my drill's chuck key?
Jun
4
revised How can I fix this portion of sliding screen door track?
added 139 characters in body
Jun
4
awarded  Popular Question
May
27
accepted How can I get my stuck sprinkler heads to go down after watering?
May
27
awarded  Popular Question