1,734 reputation
11329
bio website
location
age
visits member for 3 years, 11 months
seen Oct 16 at 16:23

Jul
15
asked What might cause water to leak under or behind a bathtub?
Jul
12
awarded  Notable Question
Jul
2
awarded  Curious
Jun
12
comment Cut a granite counter top
Any chance you can post a pic of the final result? I admire someone who can use un-named American discount tool store and achieve good results. :D
Jun
5
revised Are these foundation issues significant?
made title a question, made question a more concrete question
Jun
5
suggested suggested edit on Are these foundation issues significant?
Jun
2
comment Is it safe to run a Kinect 360 cable in drywall?
Upvoted for conduit or a channel. This future proofs your A/V setup for the next hot gaming system and makes it easier to replace the current devices/accessories when they break.
Jun
1
answered Strange noise coming from my bathroon outlet
May
31
comment Adding Undersized Fuse to Doorbell Circuit?
Also does your new chime continue to ring or does it get stuck on and buzz if your switch gets stuck on? In other words will it fail or just keep ringing if the switch sticks?
May
31
comment Adding Undersized Fuse to Doorbell Circuit?
Are you sure you're fixing a problem that actually exists? If you mind the switch (maybe check it once a year?) and replace it if it shows the least bit of wear you shouldn't have this problem again. Also how old was the old switch and chime and transformers?
May
31
awarded  Organizer
May
31
revised Adding Undersized Fuse to Doorbell Circuit?
tags added
May
30
suggested suggested edit on Adding Undersized Fuse to Doorbell Circuit?
May
30
accepted What is the right way to clear the drilled plug out of a hole saw?
May
29
comment What is the right way to clear the drilled plug out of a hole saw?
My saw has the side holes but not the top ones. I am using a saw with a pilot bit. That bit makes it harder to pry the plug out. It does not wiggle back and forth as easily.
May
29
revised What is the right way to clear the drilled plug out of a hole saw?
added 101 characters in body
May
29
asked What is the right way to clear the drilled plug out of a hole saw?
May
29
awarded  Custodian
May
29
reviewed Approve suggested edit on Troubleshooting a garage door/opener that “catches” and re-opens when wet
May
14
comment What is this velcro-like product?
Are there any markings on it at all?