Tag Info

Hot answers tagged

2

Standard bathroom vanities were made at 32" years ago when many homes typically were 2/1's with a shared bathroom. That means parents and children would be using the same vanity. To accomodate children, vanities were lowered to 32" which is standard height. Now that many homes have multiple bathrooms and even a dedicated bathroom for each room in the ...


1

If you're looking for something like this (only hopefully fancier). You could simply build the cabinet in such a way, that there is a brace where the pedestal part should connect. Just make sure the brace is strong enough to support the sink, and has a way to connect the sink to it while also allowing the plumbing to pass through. NOTE: These ...


1

This is not a trivial project, as apron front sinks have straight edges on the front sides and bottom. 2 cleats should span under the sink to support the weight. They should be sturdy enough to make the cradle, perhaps 1x3 or 1x4, oriented like joists. You could reinforce the cabinet sides with the same size boards laid flat and extending to the cabinet ...



Only top voted, non community-wiki answers of a minimum length are eligible